Multi-Way Office Tabletop Socket Factory & Exporter serving Kaunas

Yes. The electrical supply system in Lithuania operates on a standardized single-phase 230V AC at 50Hz. Sykra multi-way sockets feature standard CEE 7/3 (Type F Schuko) socket outlets with side earthing clips, accompanied by molded CEE 7/7 hybrid plugs. Rated continuously for 16A / 250V~ (handling up to 3,680W nominal), our products fully satisfy the technical installation regulations specified by the Lithuanian Standards Board (Lietuvos standartizacijos departamentas - LST) and relevant European HD 60364 standards.

Each imported shipment comes complete with an EU Declaration of Conformity (DoC), verified third-party laboratory test reports for the Low Voltage Directive (LVD 2014/35/EU), Electromagnetic Compatibility Directive (EMC 2014/30/EU for USB-equipped models), and chemical restriction compliance under the RoHS Directive (2011/65/EU and amendment 2015/863). Models bearing the German GS mark carry accredited TÜV/VDE certificate copies. Lithuanian customs brokers can seamlessly clear goods under Harmonized System (HS) Code 8536.69.

Standard OEM production turnaround is 25 to 35 calendar days following golden sample sign-off and deposit receipt. Shipping from our Ningbo factory is exceptionally efficient due to direct proximity to the deep-water Port of Ningbo-Zhoushan. Containerized sea freight to the Port of Klaipėda typically takes 32 to 40 days, followed by prompt same-day overland bonded trucking along the A1 highway directly into Kaunas logistics terminals or the Kaunas FEZ customs bonded warehouses.

Absolutely. While 1.5-meter and 2.0-meter H05VV-F 3G1.5 mm² pure copper cables are standard, we routinely produce custom lengths (e.g., 1.0m for tight desk-clamp risers, or 3.0m/5.0m for wide conference rooms). We offer private-label printing featuring Lithuanian technical descriptions, EAN-13 barcodes, and WEEE crossed-out wheelie bin markings on full-color retail gift boxes, sliding blister packaging, or eco-friendly kraft cartons.

Unlike budget power strip manufacturers that use thin recycled brass strips or spot-soldered wires that loosen over time, Sykra uses precision progressive stamping dies to fabricate continuous internal phosphor bronze busbars (0.5mm–0.7mm thickness). Phosphor bronze exhibits superior elastic memory, exceptional electrical conductivity, and minimal contact heating, easily passing endurance testing exceeding 5,000 continuous insertion and extraction cycles without terminal loosening.

Every single CEE 7/3 socket aperture is engineered with integrated internal safety shutters (tamper-resistant child locks). The shutters require balanced, simultaneous two-pin insertion pressure exceeding 40 Newtons to open, effectively preventing accidental insertion of metallic pens, screwdrivers, paper clips, or fingers—a crucial safety standard for commercial environments, schools, and domestic spaces.

Yes. Our multi-port USB-C PD series utilizes an intelligent dynamic power allocation chipset. On our 45W and 67W GaN-powered desktop strips, the system autonomously detects connected devices via USB PD 3.0 / PPS protocols. When a laptop is plugged in alongside a smartphone, the chipset automatically partitions wattage (e.g., 45W for the ultrabook, 20W for the smartphone), preventing thermal runaway while ensuring efficient fast-charging.

For standard production models with custom laser-etched buyer branding and customized color boxes, our minimum order quantity starts at just 200 to 500 units depending on the model complexity. For pilot orders or trial test batches in the Baltic market, we maintain flexible terms to assist brand distributors in establishing market presence. Contact our sales department to discuss specific project batch sizing.